UNIVERSAL TRIMS
All prices are based upon a minimum of 10 lengths of the same profile being ordered, one off and smaller quantities may incur a set up charge. Please check with our sales department if you are in any doubt.
MATERIAL THICKNESS
All Trims are 90 degrees as standard, if other angle required, Please state internal degree as shown
| Max Sizes |
1mm |
1mm Punched |
1.5mm |
1.5mm Punched |
2mm |
2mm Punched |
3mm |
3mm Punched |
| 25 x 25mm |
|
|
|
|
|
|
|
|
| Code |
ETL22/A |
ETL22/AP |
ETL22/B |
ETL22/BP |
ETL22/C |
ETL22/CP |
ETL22/D |
ETL22/DP |
| PPC |
4.94 |
5.64 |
5.74 |
6.45 |
6.66 |
7.36 |
8.18 |
8.88 |
| METALLIC |
5.79 |
6.49 |
6.60 |
7.31 |
7.54 |
8.24 |
9.07 |
9.78 |
| 25 x 50mm |
|
|
|
|
|
|
|
|
| Code |
ETL25/A |
ETL25/AP |
ETL25/B |
ETL25/BP |
ETL25/C |
ETL25/CP |
ETL25/D |
ETL25/DP |
| PPC |
6.89 |
7.59 |
8.10 |
8.80 |
9.46 |
10.16 |
11.72 |
12.42 |
| METALLIC |
8.17 |
8.87 |
9.38 |
10.08 |
10.75 |
11.46 |
13.03 |
13.73 |
| 50 x 50mm |
|
|
|
|
|
|
|
|
| Code |
ETL55/A |
ETL55/AP |
ETL55/B |
ETL55/BP |
ETL55/C |
ETL55/CP |
ETL55/D |
ETL55/DP |
| PPC |
8.84 |
9.54 |
10.45 |
11.15 |
12.25 |
12.96 |
15.26 |
15.96 |
| METALLIC |
10.54 |
11.25 |
12.15 |
12.85 |
13.98 |
14.68 |
16.98 |
17.68 |
| 75 x 75mm |
|
|
|
|
|
|
|
|
| Code |
ETL77/A |
ETL77/AP |
ETL77/B |
ETL77/BP |
ETL77/C |
ETL77/CP |
ETL77/D |
ETL77/DP |
| PPC |
12.76 |
13.46 |
15.15 |
15.86 |
17.86 |
18.56 |
22.32 |
23.03 |
| METALLIC |
15.30 |
16.00 |
17.69 |
18.40 |
20.41 |
21.12 |
24.90 |
25.60 |
Above prices exclude VAT and delivery.
